User's Manual
172
Function Description
View
1/4/8/9/16/25/36
Configure the live view screen as a single-channel layout or multi-channel
layout.
Sequence
Set customized screen split mode and channels. For details, see "4.3.5
Sequence".
Add Camera
Open the
Add Camera
interface. For details, see "4.1.4.4 Adding Camera".
Wireless Paring
Right-click Wireless Paring to quickly add IPCs. For details, see "4.3.4
Wireless Paring".
Split Track Split the screen of a certain channel. For details, see "4.3.9 Split Tracking".
Manual Control
●
Select
Record Mode
, you can configure the recording mode as
Auto
or
Manual
, or stop the recording. You can also enable or disable
snapshot function
●
Select
Alarm Mode
, you can configure alarm output settings.
Live Mode There are two modes: General/AI mode.
Crowd Distribution Select enable/disable to start/stop crowd distribution function.
Auto Focus
Click to realize auto focus function. Make sure the connected camera
supports auto focus function.
Image Click to modify the camera properties. For details, see "4.2.4 Image".
Sub Screen
Click
Sub Screen
, you can go to control the sub screen.
4.3.3.8 Picture Search
Background Information
Select the image of target person on the live view interface and then search by image for all the
related videos with the target person.
Procedure
Step 1 Click , and the live image is frozen.
Step 2 Draw a searching range by the way that is instructed by onscreen prompt, and then click
OK
.
●
If there are less than 30 faces in the selected range, the searching starts immediately.
●
If there are more than 30 faces, human bodies, and vehicles in the selected range, a
prompt is displayed indicating that there are too many targets and the searching range
should be reduced. The image stays frozen and you can start modifying range.
To Next Page
Loading...
Need help?
General
