Need help?Do you have a question about the Dahua nvr4208-8p and is the answer not in the manual?
General| Operating System | Embedded LINUX |
|---|---|
| IP Camera Input | 8 channel |
| Two-way Talk | 1 channel Input, 1 channel Output, RCA |
| Interface | 1 HDMI, 1 VGA |
| OSD | Camera title, Time, Video loss, Camera lock, Motion detection, Recording |
| Record Interval | 1 ~ 120 min (default: 60 min), Pre-record: 1 ~ 30 sec, Post-record: 10 ~ 300 sec |
| Ethernet | 1 RJ-45 Port (10/100/1000Mbps) |
| Max. User Access | 128 users |
| Smart Phone | iPhone, iPad, Android |
| HDD Bays | 1 |
| Operating Temperature | -10°C ~ +55°C (+14°F ~ +131°F) |
| Main Processor | Dual-core embedded processor |
| Multi-screen Display | 1/4/9 |
| Video Detection and Alarm | Motion Detection, MD Zones: 396 (22 x 18), Video Loss, Camera Blank |
| Alarm input | 4 |
| Relay Output | 2 |
| Compression | H.265, H.264 |
| Recording Resolution | Up to 8MP |
| Record Mode | Manual, Schedule (Regular, Continuous), MD (Video detection: Motion Detection, Camera Blank, Video Loss) |
| PoE | 8 ports (IEEE802.3af/at) |
| Protocols | HTTP, TCP/IP, IPv4/IPv6, UPnP, RTSP, UDP, SMTP, NTP, DHCP, DNS, IP Filter, PPPoE, DDNS, FTP, Alarm Server, IP Search (Support Dahua IP camera, DVR, NVS, etc.) |
| USB Interface | 2 USB2.0 |
| Power Supply | AC 100~240V, 50/60 Hz |
| Power Consumption | NVR: <10W (without HDD), PoE: Max 25.5W for single port, 130W total |
| Operating Humidity | 10%~90% RH |
To Next Page