Dahua nvr4208-8p User Manual

293
 Modify user
 Add group
 Modify group
 Modify password.
For account management please note:
 For the user account name and the user group, the string max length is 6-byte. The backspace in
front of or at the back of the string is invalid. There can be backspace in the middle. The string
includes the valid character, letter, number, underline, subtraction sign, and dot.
 The default user amount is 64 and the default group amount is 20. System account adopts two-level
management: group and user. No limit to group or user amount.
 For group or user management, there are two levels: admin and user.
 The user name and group name can consist of eight bytes. One name can only be used once. There
are three default users: admin/888888 and hidden user “default”.
 Hidden user “default” is for system interior use only and can not be deleted. When there is no login
user, hidden user “default” automatically login. You can set some rights such as monitor for this user
so that you can view some channel view without login.
 One user should belong to one group. User right can not exceed group right.
 About reusable function: this function allows multiple users use the same account to login.
 About user account and MAC. When you add a new user, you can input the MAC address of current
user. Only the user of the same MAC address can access the device remotely.(MAC address is for
the device of the same LAN.) If you leave MAC address item in blank when you add a new user, the
user of any MAC address can access the device remotely. You can set or change MAC address
when you add or modify a user. The MAC address function is also valid for PSS login. Please note
current function does not support IPV6.
After all the setups please click save button, system goes back to the previous menu.
Figure 4-173

Dahua nvr4208-8p Specifications

General

Operating System	Embedded LINUX
IP Camera Input	8 channel
Two-way Talk	1 channel Input, 1 channel Output, RCA
Interface	1 HDMI, 1 VGA
OSD	Camera title, Time, Video loss, Camera lock, Motion detection, Recording
Record Interval	1 ~ 120 min (default: 60 min), Pre-record: 1 ~ 30 sec, Post-record: 10 ~ 300 sec
Ethernet	1 RJ-45 Port (10/100/1000Mbps)
Max. User Access	128 users
Smart Phone	iPhone, iPad, Android
HDD Bays	1
Operating Temperature	-10°C ~ +55°C (+14°F ~ +131°F)
Main Processor	Dual-core embedded processor
Multi-screen Display	1/4/9
Video Detection and Alarm	Motion Detection, MD Zones: 396 (22 x 18), Video Loss, Camera Blank
Alarm input	4
Relay Output	2
Compression	H.265, H.264
Recording Resolution	Up to 8MP
Record Mode	Manual, Schedule (Regular, Continuous), MD (Video detection: Motion Detection, Camera Blank, Video Loss)
PoE	8 ports (IEEE802.3af/at)
Protocols	HTTP, TCP/IP, IPv4/IPv6, UPnP, RTSP, UDP, SMTP, NTP, DHCP, DNS, IP Filter, PPPoE, DDNS, FTP, Alarm Server, IP Search (Support Dahua IP camera, DVR, NVS, etc.)
USB Interface	2 USB2.0
Power Supply	AC 100~240V, 50/60 Hz
Power Consumption	NVR: <10W (without HDD), PoE: Max 25.5W for single port, 130W total
Operating Humidity	10%~90% RH