367
5.8.5.2.1 User name
In this interface you can add/remove user and modify user name. See Figure 5-100.
Figure 5-100
Add user: It is to add a name to group and set the user rights. See Figure 5-101.
There are three default users: admin/888888 and hidden user “default”.
Hidden user “default” is for system interior use only and can not be deleted. When there is no login user,
hidden user “default” automatically login. You can set some rights such as monitor for this user so that
you can view some channel view without login.
Here you can input the user name and password and then select one group for current user.
Please note the user rights shall not exceed the group right setup.
For convenient setup, please make sure the general user has the lower rights setup than the admin.
Figure 5-101
To Next Page
Loading...
