Dahua NVR4216-16P-4KS2

372
The alarm output interface is shown as below. See Figure 5-108
Here you can set alarm output mode: auto/manual/stop.
Figure 5-108
5.8.5.5 Default
The default setup interface is shown as in Figure 5-109.
Here you can select Network/Event/Storage/Setting/Camera. Or you can check the All box to select all
items.
Figure 5-109
5.8.5.6 Import/Export
The interface is shown as in Figure 5-110. This interface is for you to export or import the configuration
files.