Figure 4-31
4.8.2.6 Email
From main window->Setup->Network->Email, the email interface is shown as in Figure 4-32.
Figure 4-32
Please refer to the following sheet for detailed information.
Parameter Function
Enable
Please check the box here to enable email function.
SMTP Server
Input server address and then enable this function.
Port Default value is 25. You can modify it if necessary.
Anonymity For the server supports the anonymity function. You can auto
login anonymously. You do not need to input the user name,
password and the sender information.
159
To Next Page
Loading...
