Figure 4-122
4.11 Alarm
Click alarm function, you can see an interface is shown as Figure 4-123.
Here you can set device alarm type and alarm sound setup (Please make sure you have enabled audio
function of corresponding alarm events.).
Figure 4-123
Please refer to the following sheet for detailed information.
Type Parameter Function
Alarm
Type
System alarms when video loss occurs.
Motion detection
System alarms when motion detection alarm
occurs.
Tampering System alarms when camera is viciously masking.
System alarms when disk is full.
System alarms when disk error occurs.
External alarm Alarm input device sends out alarm.
213
To Next Page
Loading...
Need help?
General
