Dahua NVR6000 Series User Manual

Figure 4-56
4.8.3.1.3 Tampering
From main window->Setup->Event->Video detect->Tampering, the tampering interface is shown as in
Figure 4-57.
After analysis video, system can generate a tampering alarm when the detected moving signal reached
the sensitivity you set here.
For detailed setups, please refer to chapter 4.8.3.1.1 motion detect for detailed information.
Figure 4-57
4.8.3.1.4 Video diagnosis
Important
174

Dahua NVR6000 Series Specifications

General

Brand	Dahua
Model	NVR6000 Series
Category	Network Hardware
Language	English