EasyManua.ls Logo

Dahua VEC0404HD-M70 - Page 55

Dahua VEC0404HD-M70
165 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
50
view current IP information. You must set IP-related parameters again if you disabled
DHCP. Besides, when PPPoE is operating, you cannot modify IP/Subnet mask /Gateway.
TCP port: Default value is 37777. You may set this port.
UDP port: Default value is 37778. You may set this port.
HTTP port: Default value is 80.
Max connection: connections: 0-128. System supports maximal 128 users. 0 means there is
no connection allowed.
Preferred DNS server: Set DNS server IP address.
Alternate DNS server: Set DNS server alternate IP address.
Transfer mode: Here you can select the priority among fluency/video qualities/self-adaption.
LAN download: Under sufficient bandwidth, system can process the downloaded data first if
you enable this function. The download speed is 1.5X or 2.0X of the normal speed.
LAN service: Click to enter LAN service setting as shown in Figure 3- 40.
Figure 3- 40
3.2.4.5.1 IP Filter
Only IP listed on trusted sites can connect to this device. Trusted sites supports up to 64 IP
addresses.
If you disable trusted sites, then there will be no limit for IP address to visits this device. Please
see Figure 3- 41.

Table of Contents

Related product manuals