Interface Operation 65
Press / to add more sub VTOs/ fence stations.
6.3.5 Default
All parameters of the device, except IP address, can be restored to initial default values.
Press [Setting] for over 6 seconds.
The system pops up “Password” prompt box.
Enter the password set during initialization, and press [OK].
Press [Default].
The system displays “Default” interface.
Press [OK].
The device reboots and enters initialization interface, representing successful
restoration.
6.3.6 Reset MSG
Modify the bonded Email.
Press [Setting] for over 6 seconds.
The system pops up “Password” prompt box.
Enter the password set during initialization, and press [OK].
Press [Reset MSG].
The system displays “Reset MSG” interface, as shown in Figure 6-26.
Figure 6-26
Enter “New Email” and press [OK].
The Email will obtain security code during password resetting. For details, please refer to “6.3.1
Forget Password”.
To Next Page
Loading...
