Dahua VTO Series Quick Start Guide

错误!使用“开始”选项卡将 Heading 1 应用于要在此处显示的文字。 19
Device initialization
Enter and confirm the password, and then click Next.
The Email setting interface is displayed.
Select the Email check box, and then enter your Email address. This Email address can
be used to reset the password, and it is recommended to finish this setting.
Click Next. The initialization succeeded.
Click OK.
The login interface is displayed. See Figure 5-2.
Login interface
5.3.2 Configuring VTO Number
The VTO number can be used to differentiate each VTO, and it is normally configured according
to unit or building number.
 You can change the number of a VTO when it is not working as SIP server.
 The VTO number can contain 5 numbers at most, and it cannot be the same as any room
number.
Log in the web interface of the VTO, and then the main interface is displayed. See Figure
5-3.

Dahua VTO Series Specifications

General

Brand	Dahua
Model	VTO Series
Category	Intercom System
Language	English