Dahua VTO Series Quick Start Guide

错误!使用“开始”选项卡将 Heading 1 应用于要在此处显示的文字。 27
6 Operating VTO
Call Function
6.1.1 Calling with Room Number
On standby mode, enter room No. on the VTO.
Press / to call.
During phone call, press / to end the call.
6.1.2 Calling with Contact
All the room numbers added to SIP server is displayed in the VTO contact.
On standby mode, press / to view contact.
Select the one you need to call, and then press / to call.
During phone call, press / to end the call.
Unlock Function
6.2.1 Unlock with IC Card
Swipe the authorized access card at the access card area of the VTO to open the door.
6.2.2 Unlock with Exit Button
If there is exit button connected to the VTO, press the exit button to open the door.
6.2.3 Unlock with Password
You can unlock with personal password, public password, and duress password.
 Unlock with personal password
On standby mode, press #+6 digits room number (enter several "0" before room number to make
up if room number is less than 6 digits)+#.
Example: Room number: 201; personal password 123456, then enter #000201123456# to
unlock.

Dahua VTO Series Specifications

General

Brand	Dahua
Model	VTO Series
Category	Intercom System
Language	English