Daikin Altherma 3 R F - Page 125

9 | Electrical installation
Installer reference guide
125
ERLA11~16D + EBVH16SU23D
Daikin Altherma 3 R F
4P655196-1A – 2022.05
d Fuse
OR
1N~ 3N~
V3 W1
X1M
L N1 2 3 1 2 3
L1 L2 L3 N
4 Fix the cables (power supply and interconnection cable) with a cable tie to the
stop valve attachment plate and route the wiring according to the illustration
above.
5 Choose a knockout hole and remove the knockout hole by tapping on the
attachment points with a flat head screwdriver and a hammer.
6 Route the wiring through the frame and connect the wiring to the frame at
the knockout hole.
Routing through the
frame
Choose one of the 3 possibilities:
a
a
a
2
3
1
a Power supply cable
Note: Route the interconnection cable together
with the refrigerant piping. See "10.2To finish the
outdoor unit installation"[4146].