Daikin Altherma 3 R F - Indoor Unit; To Unpack the Indoor Unit; To Remove the Accessories from the Indoor Unit

4 | About the box
Installer reference guide
25
ERLA11~16D + EBVH16SU23D
Daikin Altherma 3 R F
4P655196-1A – 2022.05
3 Remove and discard the spacer (c).
4 Reinstall the nut (a) of the compressor mounting bolt and torque to 10.1N•m.
4.2 Indoor unit
4.2.1 To unpack the indoor unit
1 2
8×
4.2.2 To remove the accessories from the indoor unit
1×
b
2×
a
1×
g
1×
h
1×
i
1×
j
4×
l
4×
k
1×
m
1×
n
1×
c
1× 1×
ed
1×
f
a Shut-off valves for water circuit
b Differential pressure bypass valve
c Tundish (to mount onto the pressure relief valve discharge pipe)
d Quick fixture (for the discharge pipe)
e Discharge pipe (for pressure relief valve)
f Cable tie + clip (for the discharge pipe)
g General safety precautions
h Addendum book for optional equipment
i Indoor unit installation manual
j Operation manual
k Sealing rings for shut-off valves (space heating water circuit)
l Sealing rings for field-supplied shut-off valves (domestic hot water circuit)
m Sealing tape for low voltage wiring intake (66×80mm)
n Antisweat sticker to cover the hole at the back of the unit (50×80mm)