Daikin BRC2E61 - Page 9

7
8
10
12
13
11
9
8. DISPLAY “ ” (UNIT NO.
MODE)
Duringeldsetting(settingperindoorunit
duringgroupcontrolfunction),thedisplay
showstheselectedunitno.
9. DISPLAY “ ” (VENTILATION/
AIR CLEANING)
Thisdisplayshowsthatthetotalheat
exchangeandtheaircleaningunitarein
operation. (These are optional accessories).
10. DISPLAY “ ” (AIRFLOW
RATE [AIRFLOW LEVEL/FAN
SPEED])
Thedisplayshowstheairowrate[Lv.1,Lv.2,
Lv.3,Lv.4,Lv.5andAuto]thatissetforthe
indoor unit.
Theairowratewillnotbedisplayedifthe
indoorunitdoesnothaveairowratecontrol
function and the number of available fan
speeds may differ depending on the indoor
unitspecications.
11. DISPLAY “ ” (AIRFLOW
DIRECTION)
Thedisplayshowswhentheairowdirection
andswingareset.Thisiconisnotdisplayedif
the indoor unit does not have a function to set
airowdirections.
12. DISPLAY “ ” (TIMER MODE
ON/OFF)
Thedisplayshowswhenthetimerfunctionof
theremotecontrollerissettoON/OFF.
13. DISPLAY “ ” (GROUP
NO.)
Duringeldsetting,thedisplayshowsthe
mode no. function concerned.
01_EN_4P543053-1C.indd 7 10-May-19 4:13:18 PM