Daikin BRC2E61 - Field Settings Configuration; Entering and Navigating Field Setting Mode

14
7. Field settings
1) Press and hold both the Mode
Selector button ( ) and the
TemperatureSetting(down)button
(
) for 4 seconds or longer.
2) Selectthedesired“ModeNo.”by
usingtheAirowDirection
Adjustment button ( ).
Forcommonlyusedeldsetting
items,refertothetableonpage16.
3) Inthecaseofsettingperindoorunit
duringgroupcontrol(whenaMode
No.suchas20,21,22,23or25is
selected),selectthe“IndoorunitNo.”
to be set by using the Fan Speed
Control button ( ).(Inthecaseof
groupsetting,thisoperationisnot
needed.)
4) SelecttheFIRSTCODENO.tobe
changed by using the Temperature
Setting (up) button (
) and
SECONDCODENO.tobechanged
by using the Temperature Setting
(down)button( ).
Multiple identical mode number
settings are available.
5) Press the Mode Selector button
( ).
Field setting mode is set.
6) Inthecaseofmultiplesetting
changes,repeat2) to 4).
Press and hold
2 buttons for
4 seconds or longer.
Field setting mode is set
1)
2)
3)
4)
5)
[Basic screen]
[Field setting mode screen]
FIRSTCODENO.
4)
SECONDCODENO.
01_EN_4P543053-1C.indd 14 10-May-19 4:13:23 PM