Daikin BRC2E61 - Program Timer Functions; Setting the OFF Timer

28
10.4 Program timer operation
Operateinthefollowingorder.
• Thetimerisoperatedinthefollowingtwoways.
Programming the stop time (
)
.... The air conditioner stops operating after the set time has elapsed.
Programming the start time (
)
.... The air conditioner starts operating after the set time has elapsed.
• The start and the stop time can be simultaneously programmed.
• Thetimersettingiseffectiveonlyonce.WhenusingtheTIMERoperationeveryday,thesettingis
requiredbeforeeachuse.
OFF Timer mode setting
1
• Press both the Fan Speed Control button ( )
andtheTemperatureSetting(down)button(
)
simultaneouslytoenterOFFtimermodesetting.
Thedisplayblinks“ ”.
2
• PresstheTemperatureSetting(up/down)button
(
/ ) and set the time for stopping the air
conditioner.
:Whenthisbuttonispressed,thetimer
advances by 1 hour.
:Whenthisbuttonispressed,thetimer
goesbackwardby1hour.

Ifsetthetimeis“0”,itmeansthatthetimer
stoppingsettingwascancelled.
3
• Afterselectingthetimetostoptheairconditioner,
press the Fan Speed Control button ( ) to set it.
The timer setting procedure ends and the display
“ ”changesfromaashinglighttoaconstant
light.
01_EN_4P543053-1C.indd 28 10-May-19 4:13:35 PM