Daikin BRC2E61 - Page 29

27
Precautions for Setting Cool/Heat selection eligibility
• TheCool/Heatselectioneligibilityneedstobesetforasingleremotecontrollerinthefollowing
case.
(Heat Pump System)
Indoorunit
A number of indoor units are
connected to a single outdoor unit.
Set the Cool/Heat/Fan mode selection
eligibility in one of the remote controllers.
(Heat Recovery System)
Indoorunit
A number of indoor units are connected
to a single BS unit.
Set the Cool/Heat/Auto/Fan mode selection
eligibility in one of the remote controllers.
BS(BranchSelector)unit:
The BS unit is used for Cool
or Heat mode selection.
01_EN_4P543053-1C.indd 27 10-May-19 4:13:34 PM