Daikin DAR09 - Page 13

13
PRODUCT IDENTIFICATION
DX14SN*
Model/Rev Description
DX14SN0[18-60]1AA
Initial release new models of Daikin® Brand 14 SEER standard condenser 5mm
architecture with updated scroll compressors.
DX14SN0241AB Replaced 1/12 hp fan motor with 1/8 hp fan motor.
DX14SN0251BA
Changed compressor from K5 to K6, Changed coil slab from 25" tall to 30" tall, Changed
louvers from 24" tall to 29" tall
DX14SN0191AB
Remove HS Kit from Control Panels of condenser units with updated
ZP14K6E scroll compressors.
DX14SN0[30-43]1AB Change from copper wound motor to aluminum wound motor
DX14SN0[18, 24]1BA
Convert ANX13 / 14 1.5 and 2 ton models to Rechi compressors.
These will be a copy of GSX Rechi models.
DX14SN0[30-43]1AC
DX14SN0[48, 60]1AB
Refrigerant charge reduction
DX14SN0[48,60]1AC Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
DX14SN0181BB
Switching 3-legged and 4-legged compressors in 13SEER and 14SEER condensers to
those with improved overload protection (OLP).
DX14SN0241BC
Charge Optimization for 14 SEER 2T lineup
DX14SN0[36,42]1AD Charge Optimization for 14 SEER 3T and 3.5T condenser units.
DX14SN0181BC
DX14SN0191AC
DX14SN0251BB
Replaced motor 0131M000266 with 0131M00811
DX14SN0241BB
Replaced motor 0131M000266 with 0131M00811
Refrigerant Charge Reduction
DX14SN0[37,43]1AD Charge Optimization for Southwest 3T and 3.5T lineup
DX14SN
Daikin® BRAND X-R410A 14 SEER SINGLE STAGE NO MINAL CONDENSERS