Daikin DAR09 - Page 12

12
PRODUCT IDENTIFICATION
DX14SA*
Model/Rev Description
DX14SA0[18-60]1AA
Initial release new models of Daikin® Brand 14 SEER standard condenser 5mm
architecture with updated scroll compressors.
DX14SA0[18-60]AB Low pressure switch added to models.
DX14SA0241AB Replaced 1/12 hp fan motor with 1/8 hp fan motor.
DX14SA0241BA
Changed compressor from K5 to K6, Changed coil slab from 25" tall to 30" tall, Changed
louvers from 24" tall to 29" tall
DX14SA0251BA
Changed compressor from K5 to K6, Changed coil slab from 25" tall to 30" tall, Changed
louvers from 24" tall to 29" tall
DX14SA0191AB
Remove HS Kit from Control Panels of condenser units with updated
ZP14K6E scroll compressors.
DX14SA0241BA Change compressor from K6 to K5 on ASX140241 and DX14SA0241
DX14SA0[30-43]1AB Change from copper wound motor to aluminum wound motor
DX14SA0[48,60]1AB Refrigerant charge reduction
DX14SA0[48,60]1AC Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
DX14SA0[36,42]1AD Charge Optimization for 14 SEER 3T and 3.5T condenser units.
DX14SA0181AB
DX14SA0191AC
DX14SA0[24,25]1BB
Replaced motor 0131M000266 with 0131M00811
DX14SA0[37,43]1AD Charge Optimization for Southwest 3T and 3.5T lineup
DX14SA
Daikin® BRAND X-R410A 14 SEER SINGLE STAGE A- BASE UNIT CONDENSERS