1-2
1.3 BASIC OPERATION OF
REFRIGERATION UNIT
1.3.1 Starting operation
(1) Connect the power plug to the power supply.
Insert the plug q suited to the power source
voltage, and fasten the plug firmly.
(2) Turn on the main power switch of the power
source facility (outside the unit)
(3) Turn on the circuit breaker w.
(4) Close the control box cover fully.
If it is poorly closed, it will allow water entry.
Check the contact around the packing, and
firmly close the cover. (Refer to the
" CAUTION " on page 5.)
(5) Press the UNIT ON/OFF key e.
w
e
To Next Page