EasyManuals Logo

Daikin SUPER MULTI NX G Series User Manual

Daikin SUPER MULTI NX G Series
464 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #345 background imageLoading...
Page #345 background image
CTXS07HVJU, FTXS-LV Series EDUS121131
340 Operation Manual
Care and Cleaning
CAUTION
When removing or attaching the front panel, use a robust and stable stool and watch your steps carefully.
When removing or attaching the front panel, support the panel securely with hand to prevent it from falling.
After cleaning, make sure that the front panel is securely fi xed.
Remove the front panel.1.
Open the front panel.
Slide the front panel to either the left or right and
pulling it toward you.
This will disconnect the front panel shaft on one
side.
Front panel shaft
1) Slide
2) Pull
1) Slide
2) Pull
Disconnect the front panel shaft on the other side
in the same manner.
Clean the front panel.2.
Wipe it with a soft cloth soaked in water.
Only neutral detergent may be used.
If you wash the panel with water, wipe it with a dry
soft cloth, and allow to dry in the shade.
Attach the front panel.3.
Align the front panel shaft on the left and right of
the front panel with the slots, then push them all
the way in.
Front panel
shaft
Slot
Close the front panel slowly. (Press the panel at
both sides and the central area.)
Front panel

Table of Contents

Other manuals for Daikin SUPER MULTI NX G Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Daikin SUPER MULTI NX G Series and is the answer not in the manual?

Daikin SUPER MULTI NX G Series Specifications

General IconGeneral
BrandDaikin
ModelSUPER MULTI NX G Series
CategoryAir Conditioner
LanguageEnglish

Related product manuals