EDUS121131 CDXS, FDXS Series
Operation Manual 415
3
4.5 POWERFUL Operation
14
POWERFUL Operation
POWERFUL operation quickly maximizes the cooling (heating) effect in any
operation mode. You can get the maximum capacity.
To start POWERFUL operation
Press during operation.
POWERFUL operation ends in 20 minutes. Then the system automatically operates •
again with the previous settings which were used before POWERFUL operation.
“ •
” is displayed on the LCD.
To cancel POWERFUL operation
Press again.
“ • ” is no longer displayed on the LCD.
[Example]
Normal operation
When you want to get the •
cooling effect quickly, start
the POWERFUL operation.
POWERFUL operation
POWERFUL operation will •
work for 20 minutes.
Back to normal
operation
NOTE
Notes on POWERFUL operation
When using POWERFUL operation, there are some functions which are not available.•
POWERFUL operation cannot be used together with ECONO and OUTDOOR UNIT QUIET operation.•
Priority is given to the function of whichever button is pressed last.
POWERFUL Operation can only be set when the unit is running. Pressing the operation stop button causes the settings to be canceled, and •
“ ”
is no longer displayed on the LCD.
POWERFUL operation will not increase the capacity of the air conditioner if the air conditioner is already in operation with its maximum capacity •
demonstrated.
In COOL, HEAT and AUTO operation
•
To maximize the cooling (heating) effect, the capacity of outdoor unit is increased and the airfl ow rate is fi xed to the maximum setting.
The temperature and airfl ow settings are not variable.
In DRY operation
•
The temperature setting is lowered by 4.5°F (2.5°C) and the airfl ow rate is slightly increased.
In FAN operation
•
The airfl ow rate is fi xed to the maximum setting.
When using priority-room setting
•
See “Note for multi system”.
Page 19
To Next Page
Loading...
Need help?
General
