7
1
Press
to select your desired
operation mode.
Each time the button is pressed, the mode
changes as follows.
The system does not have the FAN mode.
Automatic · DRY · Cooling · Heating Operation
2
Press .
The run indicator lamp lights up.
Select your desired operation mode.
Once preset, the system can get restarted in the same operation mode.
1
2
Run indicator lamp (green)
(Automatic)
(DRY)
(Heating)
(Cooling)
(DRY) (Cooling)
Cooling only
model
Heat pump
model
To stop the operation:
Press again.
The run indicator lamp goes out.
In Automatic, the temperature setting and
operation mode (DRY, Cooling or Heating) are
automatically selected according to the room
temperature and outdoor temperature at the
time of starting operation.
DRY operation
In this mode, humidity is removed from the air.
Note
While running in the DRY mode, you may
feel cool or warm air from the air outlet. In
this case, readjust the airflow direction with
the vertical airflow direction louvers. (except
Duct Connected type)
Automatic operation
To Next Page
Loading...
Need help?
General
