Installation ED34-862
378 FXLQ-MA / FXNQ-MA
Center of Gravity
Bolt Pitch
(1) Positioning of holes for fastening to the wall
(2) How to open / close the front panel
1. Open the lid of control panel (both left and right)
2. Remove screws (both left and right) that lock the knobs in position.
3. Push the knobs (both left and right) to the rear.
4. Lift the front of the top plate.
5. Lower the front panel towards the front of the unit.
• To close, perform the procedure in opposite order. Pull towards the front unit the knob snaps in place.
C : 3P086154-2N
FXLQ FXNQ
C : 4D034527C
500
570
710
Unit (mm)
FXLQ32 40MAVE
FXLQ50 63MAVE
FXLQ20 25MAVE
C : 4D034533C
395
465
505
Unit (mm)
FXNQ20 25MAVE
FXNQ32 40MAVE
FXNQ50 63MAVE
A
192233
FXNQ20 · 25MAVE
FXNQ32 · 40MAVE
FXNQ50 · 63MAVE
590
730
1010
Model A (mm)
1
4
3
4
5
3
2
2
3
2
Все каталоги и инструкции здесь: http://splitoff.ru/tehn-doc.html
To Next Page
Loading...
