ED34-862 Installation
FXUQ-MA 397
12
Bolt Pitch
1. FOR 4-WAY AIR DISCHARGE
1. Relation of holes for indoor unit, suspension bolt
position, piping and wiring. (Refer to Fig. 2)
(Illustrations seen from ceiling)
∗ Dimensions in ( ) for 100 and 125 models
∗∗∗ Suspension bolt pitch
2. Make holes for suspension bolts, refrigerant and
drain piping, and wiring. (Refer to Fig. 3)
• Refer to the paper patten for the locations.
• Select the location for each of holes and open the
holes in the ceiling.
NOTE
All the above parts are field supplied.
790∗∗∗
895
790 ∗∗∗
895
30180
83
33
163
Upward running drain
piping shown above
A
B
C
D
∗ 80 (147)
∗ 58 (125)
∗ 40 (107)
Drain hose connection (VP20)
Liquid piping
Gas piping
Fig. 2
50-100
Ceiling slab
Anchor
False ceiling
Suspension bolt
Fig. 3
Long nut or turnbuckle
2. FOR 2-WAY OR 3-WAY AIR DISCHARGE
2-way and 3-way air discharge must be set from the remote controller. For details, see FIELD
SETTING.
1.
Relation of holes for indoor unit, suspension bolt
position, piping and wiring. (Refer to Fig. 8)
NOTE
Illustrations seen from ceiling
∗ Dimension in ( ) for 100 and 125 models
∗∗∗Suspension bolt pitch
2. Make holes for suspension bolts, refrigerant
and drain piping, and wiring. (Refer to Fig. 9)
• Refer to paper pattern for the locations.
• Select the location for each of holes and open
the holes in the ceiling.
790 ∗∗∗
895
790 ∗∗∗
895
30180
83
33
117
Rightward running drain
piping shown above
A
B
C
D
∗ 80 (147)
∗ 58 (125)
∗ 40 (107)
Liquid piping
Drain hose
connection (VP20)
Gas piping
Fig. 8
50-100
Ceiling slab
Anchor
False ceiling
Suspension bolt
Fig. 9
Long nut or turnbuckle
Все каталоги и инструкции здесь: http://splitoff.ru/tehn-doc.html
To Next Page
Loading...
