DAITEM MHF02X - Page 15

15
(1) if a position contact is connected.
(2) Gate access can be operated using (see HANDSET/CONFIGURATION/OPEN BUTTON menu).
Activate the outdoor
caller unit
Status display
on the handset (1)
Gate access status
1. Pick up the handset (if it is
on the base), open the flip
cover and quickly press
(2).
2. If you have several gate
access points,
select the access point to
be opened using the keys
then .
Closed
Closed
C
C
3. If you only have one gate
access point,
the opening command will
be sent directly to that
access.
Opening command sent
C
3. The gate is activated within
5 seconds.
Open
C
7.2.2 Using the handset