DAITEM MHF02X - Page 23

23
Menu
Setting
possible
Using the setting
Factory: TAG 1
for 1
st
tag, TAG 2
for 2
nd
tag, etc.
Factory: ACTIVE
for all tags
NAME Can be used to change the name allocated to a previously
registered tag (8 characters max.).
1. Select the tag to be modified.
2. Modify the 1
st
character
using the keys .
3. Move on to the next character
using the key .
4. Perform steps 2 and 3 for all the characters and then, once
the desired name has been programmed, press .
C
C
ACTIVE/
INACTIVE
ACTIVE
INACTIVE
Activates or deactivates a tag that has already been registered.
Each tag is enabled by default when it is registered.
DELETE Deletes a tag that has already been registered.
The key selects the previous character.
TIP: press and hold the keys
to quickly scroll through the characters.