Adeo Group s.r.l.
Via della Zarga n. 50 - 38015 LAVIS (TN)
Tel: +39 0461 248211 - Fax: +39 0461 245038
Mail: info@adeogroup.it – www.adeogroup.it
Connected On Channel It automatically shows the channel assigned in Connections
Color Settings
Current Intensity Send and receives the intensity value. Click Set to send the value
Current Color Send and receive the colour value. Click on Set to send the value
Preset Color Set the colour preset at switch-on
Current White Sends and receives the value of White. Click on Set to send the value
Options
DALI Curve Off to maintain linear dimming (DMX type)
On to take advantage of the logarithmic dimming of DALI
Intensity Auto Preset Off to exclude the storage of the last light status before switch-off
On to store the last state of the light before switch-off
Color Autoset Preset Off to exclude the storage of the last color state before switch-off
On to store the last color status before switch-off
Logging
Log Level Off to disable logging in Lua
5 - Debug, 4 - Trace, 3 - Info, 2 - Warning, 1 - Error, 0 – Alert set the Log Level.
The remote assistance requires 5 - Debug
Log Mode Print, Log and Print and Log
Disable Log Interval it is possible to set an interval within which to disable logging, so as to save processing
Driver Info
Driver Version Show Driver Version
To Next Page
Loading...
General