38. Best Practice
a. Before integration with the Control4, it must be ensured that the lighting system is working properly. Wiring errors or hardware
malfunctions can affect driver programming and usage.
b. Using a diagram or a lighting project is always very useful to then reproduce in System Design the system to be controlled.
c. We recommend that you never use a single gateway to control all 64 DALI devices provided. Due to the excessive consumption
of energy, of individual DALI devices on the bus, it may happen that there is no proper communication. This is because the
integrated power supply fails to meet the energy demand of all 64 devices. It's best to provide multiple gateways.
d. It is important to understand what kind of lighting fixtures and the behavior they will have to have. If we have to carry out a
control on a tunable white type lighting fixture (or dynamic white or white light temperature) we will have several options in front
of us:
iv. DALI DT6, unlikely but feasible. The addressing will take away two channels associated with 2 Adeo Control SGDD-
C4-4 Single Dim-Light Driver
v. DALI DT8, more plausible. The addressing will take away only one channel associated with the Adeo Control SGDD-
C4-4 TW DT8 Driver
vi. DMX, recommended even if implausible. The addressing will take away two channels associated with 2 Adeo Control
SGDD-C4-4 Single Dim-Light Driver. In this case we have 512 channels available. We recommend the use of the
ADEO CONTROL 4CH-LED-DIMMER-DMX.
e. It is always recommended to deal with those who are in charge of providing the lighting control devices.
f. It is important to decide right away how to operate (see DALI global settings at pag. 13):
iv. Address, in this case we will have 64 "Connections" available in Composer
v. Group, in this case we will have 16 "Connections" available in Composer
vi. Broadcast, in this case we will have 1 "Connections" available in Composer
g. We invite you to use the Drivers in conjunction with theAgent Advanced Lighting
For more info
www.adeogroup.it
info@adeogroup.it
To Previous Page
Loading...
General