DALCNET Adeo Control SGDD-C4-4 User Manual

Adeo Group s.r.l.
Via della Zarga n. 50 - 38015 LAVIS (TN)
Tel: +39 0461 248211 - Fax: +39 0461 245038
Mail: info@adeogroup.it – www.adeogroup.it
Adeo Control SGDD-C4-4
Manual
Rev. 1.6
Ad e o C o n t r o l i s a b r a n d o f A d e o G ro up s . r .l .
16 / 36
SETTINGS
15. Network
The gateway uses the Ethernet port via IPv4 protocol.
The default IP address is: 192.168.1.4
The same address must be entered in Composer Pro in the Connections/Network section
After changing the settings, click on the top right button 'APPLY' otherwise the changes will be
lost.
16. Login settings
After logging in as ADMIN, you can change your username and password by clicking on Login
Settings.
After changing the settings, click on the top right button "APPLY" otherwise the changes will be
lost.
17. sACN
The gateway implements the sACN protocol and can be used as a gateway by the main lighting
software and controllers:
• sACN → DMX
• sACN → DALI
The port used is there UDP 5568.
After changing the settings click on the top right button "APPLY" otherwise the changes will be
lost.

DALCNET Adeo Control SGDD-C4-4 Specifications

General

Brand	DALCNET
Model	Adeo Control SGDD-C4-4
Category	Gateway
Language	English