6
54
CLEANING AND MAINTENANCE INFORMATION
WARNING
Perform the procedure with the machine disconnect-
ed from the power supply and when it is cold so as to
prevent the risk of electric shocks and burns.
Carry out the operations described.
1) Disconnect the plug from the socket and wait for the
machine to cool down.
2) Support the panels (C) to prevent them falling.
3) Unscrew the studs (A).
Use the special spanner (B) supplied.
NOTICE
Do not remove the LED bar from the supports.
4) Clean the LED bar and casing panels with a non-abra-
sive cloth dampened with water (no detergents), to pre-
vent damage to the bar and panels.
5) Position the casing panels (C).
Cleaning the casing panels and the LED lamp
6) Screw in the studs (A).
NOTICE
Carry out cleaning according to the cleaning and hy-
giene plan for the room in which the machine is in-
stalled.
To Next Page
Loading...
