Piranha Color Camera User’s Manual 20
DALSA 03-032-10211-01 5/9/2007
Medium Configuration
A Medium Configuration uses 2 MDR26 connectors and 2 Channel Link chips. The
main characteristics of the Base Configuration are:
Ports supported: A, B, C, D, E, F
Serializer bit width: 28
Number of chips: 2
Number of MDR26 connectors: 2
Medium Configuration (Connector 2)
2 Channel Link Chips
Camera
Connector
Right Angle
Frame Grabber
Channel Link
Signal
Cable Name
1 1 inner shield Inner Shield
14 14 inner shield Inner Shield
2 25 Y0- PAIR1-
15 12 Y0+ PAIR1+
3 24 Y1- PAIR2-
16 11 Y1+ PAIR2+
4 23 Y2- PAIR3-
17 10 Y2+ PAIR3+
5 22 Yclk- PAIR4-
18 9 Yclk+ PAIR4+
6 21 Y3- PAIR5-
19 8 Y3+ PAIR5+
7 20 terminated PAIR6+
20 7 terminated PAIR6-
8 19 Z0- PAIR7-
21 6 Z0+ PAIR7+
9 18 Z1- PAIR8-
22 5 Z1+ PAIR8+
10 17 Z2- PAIR9+
23 4 Z2+ PAIR9-
11 16 Zclk- PAIR10-
24 3 Zclk+ PAIR10+
12 15 Z3- PAIR11+
25 2 Z3+ PAIR11-
13 13 inner shield Inner Shield
26 26 inner shield Inner Shield
Notes:
*Exterior Overshield is connected to the shells of the connectors on both ends.
**3M part 14X26-SZLB-XXX-0LC is a complete cable assembly, including connectors.
Unused pairs should be terminated in 100 ohms at both ends of the cable.
Inner shield is connected to signal ground inside camera
To Next Page
Loading...