Danaher Motion Kollmorgen Speciality Electronics Product Description
SERVOSTAR CD-LITE User Manual 1
Product Description
The SERVOSTAR
®
CD-Lite is a new economic addition to the SERVOSTAR family. Designed
primarily for current loop applications, this amplifier provides high performance with fully digital current
and velocity loop control. Digital control brings with it all the advantages of ease of use, eliminating the
need adjusting potentiometers. Since the control loop parameters are stored digitally, there is no drift in
performance over time. Operating modes enable internal sinusoidal from a ±10 VDC command.
The documentation provided for the SERVOSTAR CD-Lite includes this document, the SERVOSTAR
®
CD-Lite Quick Start manual, and the SERVOSTAR
®
CD-Lite Variable and Command Reference. These
are provided to assist you in installation and use of the SERVOSTAR CD-Lite product.
Product Features
The SERVOSTAR CD-Lite includes a vast array of features. Its various control techniques, interfaces,
and user tools give the customer a fully compatible amplifier to meet most motion control applications.
The user features are:
Main Features
♦ Digital current loop
♦ Velocity loop mode
♦ Available in 3, 6, or 10 amp continuous current
♦ Self protecting power stage
♦ Encoder feedback
♦ PWM switching frequency up to 16 kHz
♦ Supports Danaher Motion Kollmorgen’s wide range of motor solutions
♦ Optional 24 VDC logic input supply, to separate from main supply
♦ Easy tuning and setup using MOTIONLINK for Windows
♦ Easy initialization utilizing a Personality Module.
Robust Design
♦ Fully isolated electronics
♦ Fault Protection against output phase to phase short circuit, over-voltage, under-voltage, over-
current, over-temperature (motor and drive), feedback loss
♦ Current foldback (I2t) provides protection against over-heating drive
♦ Can be optionally used with Danaher Motion Kollmorgen's Regeneration Resistor
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
