Connect to the PC:•
This So Speaky PVR HDD Recorder & Player is also a personal multimedia files storage device and can be
used by connecting to the PC.
1) Connect to the power supply
While using the So Speaky PVR HDD recorder & player with PC, power supply is also needed.
2) Connect to PC with USB cable
Connect the So Speaky PVR HDD Recorder & player to PC with USB cable then you can copy and transfer
data.
Follow the instruction of the above picture and connect the device to PC.
Power on the PC and enter the system
The PC detects the device automatically and then the device can be used as an external USB storage
device.
After data transfer finished, please remove the USB storage device safely (click the USB device icon to stop
the USB device and then pull out the USB cable).
Notes:
Please don’t power off when it connect to PC for reading and writing. •
If there is no USB detected after connected with USB cable, maybe the PC is operating other •
program, please pull off the USB cable and wait about 10 seconds then connect again.
This So Speaky PVR HDD Recorder & Player is also a personal multimedia files storage device and can be
used by connecting to the PC. Individuals can browse and copy files easily.
24
www.danedigital.com
To Next Page
Loading...
Need help?
General
