Danfoss 088U0215 - Mounting; Uninstallation

Danfoss Heating Solutions VIUHR402 © Danfoss 05/2011
10
5. Mounting
Placing a room thermostat (fig. 3)
• A room thermostat should be placed in accordance
with fig. 3.
IMPORTANT!
Wherever possible, a room thermostat should be installed
at a place where the effect of sunlight, strong artificial
light (e.g. halogen spotlight), draught, other heat-emitting
equipment (e.g. TVs) etc. is avoided.
Please note that no furniture, rugs etc. should be perma-
nently placed within the area of the InfraRed Floor Sensor as
shown in fig. 3.
6. Uninstallation
Activate Uninstall mode on Master Controller (fig. 1)
• Use the Menu selection button  to choose the Unin-
stall menu. Uninstall LED  flashes.
• Activate Uninstall mode by pressing OK . Uninstall
LED  goes ON.
Deselect output on Master Controller
• Select output to be removed by output selection
button .
• Remove flashing output  with OK .
Instruction CF-RF Room Thermostat with Infrared Floor Sensor