20
Running your programme
The 102E7 will either control your hot water and heating
together, or just your hot water (i.e. during the summer,
when heating is no longer required).
To make your selection use the rocker switch under
the LCD display to select either WATER/HEATING or
WATER ONLY
To run the central heating and/or hot water programme
press the SELECT button.
As you press SELECT a bar on the display will move
between ON, OFF, ALLDAY and AUTO
ON = the hot water/heating will remain on
constantly
OFF = the hot water/heating will not come on
AUTO = the hot water/heating will come on
and go off according to the programmed times
ALLDAY = the unit will come on at the fi rst
programmed ON and will remain on until the
last programmed OFF
Select the option you require, depending on your
circumstances, time of year, etc.
RUN mode
To Next Page
Loading...
Need help?
General
