AK-PC 783 Capacity controller RS8GN202 © Danfoss 11-2013 85
7. Move on through all the individual displays for the
condenser group.
Change displays with the +- button. Remember the settings at
the bottom of the pages – the ones that can only be seen via
the ”Scroll bar”.
8. Safety limits
9. Go back to the overview and Move on to the ther-
mostat group
Check the settings.
10. Go back to the overview and Move on to the press-
sostat group
Check the settings.
11. Go back to the overview and on to the general
alarm inputs
Check the settings.
12. The controller setup has been completed.
Check of settings - continued
The last page contains safety limits and restart times.
To Next Page