User Guide | Controller for appliance control, AK-CC 450
© Danfoss | ADAP-KOOL® | 2015.10
14 | RS8EU702 |
Connection labels
The controller is provided with labels from the factory indicating
application 1.
If you employ another use, labels are provided so that you can
mount the relevant one.
For application 2 to 5 and 9 it is only the lower label that needs to
be mounted.
For application 6, 7 and 8 both labels have to be mounted.
The number is indicated on the left-hand side of the label. Use the
label with the chosen application number.
To Next Page
Loading...
