Danfoss AK-LM 330 - Lock Configuration

AK-LM 330 RS8FR302 © Danfoss 2015-08 59
Lock conguration
1. Go to Conguration menu
2. Select Lock/Unlock conguration
3. Lock Conguration
The controller will now make a comparison of selected func-
tions and dene inputs and outputs. The result can be seen in
the next section where the setup is controlled.
Conguration - continued
Press in the eld against Conguration lock.
Select Locked.
Press OK.
The setup of the controller has now been locked. If you subsequently
want to make any changes in the controller’s setup, remember rst to
unlock the conguration.