Danfoss AK-LM 330 Design Guide

64 RS8FR302 © Danfoss 2015-08 AK-LM 330
Start the control
1. Go to Start/Stop display
Press the blue manual control button at the bottom of the
display.
2. Start control
First start of control - continued
Press in the eld against Main switch.
Select ON.
Press OK.
The controller will now start controlling when the external
switch also are activated to “ON”.
If the alarm relay is enabled, the alarm relay can be reset
using this function.
Remember to investigate where the alarm comes from.

Danfoss AK-LM 330 Specifications

General

Brand	Danfoss
Model	AK-LM 330
Category	Measuring Instruments
Language	English