Danfoss AK-LM 330 - Page 66

66 RS8FR302 © Danfoss 2015-08 AK-LM 330
5. Log survey
6. Start the log collection
Move to the rst of the three displays and start the log collec-
tion
Here is the survey of all the parameters that are collected in the
log.
If a parameter has to be removed from the log collection, you
must select the parameter and then press Remove.
If a parameter has to be added it is done in accordance with
the earlier display
A LOG CAN ONLY BE DISPLAYED IF:
• THE CLOCK HAS BEEN SET AND
• THE CONFIGURATION IS LOCKED