Danfoss APP series User Manual

180R9346 | AQ240486503020en-001702 | 23© Danfoss | 2023.03
Operation guide Installation, Operation and Maintenance APP 53-92 pumps
1)
Max. allowable working pressure at continuous operation. The pump is designed according to EN809, i.e. to
withstand hydrostatic test pressure (HTP) of 1.3 x MAWP. For lower and higher pressure, please contact Danfoss.
2)
Dependent on the NaCI concentration.
3)
Typical eciency at max. pressure after a system has been commissioned and run in.
4)
Maximum area covered with recommended IE3 motor congurations (excl. of space to service pump)
5)
IE3 and NEMA motors, 4-pole, current insulated ND non drive end bearing
6)
Operating with water
Pump size APP 53/1500 APP 65/1500 APP 78/1500 APP 86/1700 APP 92/1780
Code number 180B7806 180B7807 180B7808 180B7809 180B7810
Technical specications
Media
2)
tempera-
ture
°C 2–50 2-50 2–50 2-50 2-50
°F 36–122 36-122 36–122 36-122 36-122
Ambient tempera-
ture
°C 0–50 0-50 0–50 0-50 0-50
°F 32–122 32-122 32–122 32-122 32-122
Weight (dry)
kg 196 196 196 196 196
lb 432 432 432 432 432
Weight (opera-
tion)
6)
kg 204 204 204 204 204
lb 450 450 450 450 450
Sound
pressure level
db(A) 84-95 84-95 84-93 84-96 84-96
Footprint with
IE3 motor
4)
m² 1.49 1.49 1.50 1.50 1.50
Foot² 16.0 17.0 16.1 16.1 16.1
Typical motor size
Max.speed at max.
pressure
5)
kW 132 160 160 200 200
HP 200 250 250 300 300

Danfoss APP series Specifications

General

Brand	Danfoss
Model	APP series
Category	Water Pump
Language	English