98 | 180R9346 | AQ240486503020en-001702 © Danfoss | 2023.03
Operation guide Installation, Operation and Maintenance APP 53-92 pumps
6. Tool sets
Designation
180Z0665 Tool set APP 53-92
Press bush 1
Cone bushing extractor 1
M6 Allen key 1
M8 Allen key 1
M8 x 140 (30 mm thread) Unbraco 1
M8 x 70 (full thread) Unbraco) 3
Valve plate xation device 3
Tool bracket 1
Tool, washer 2
M16 pin 1
Nut M16 A4 4
ø17/30 x 3 washer 1
Screw M8 x 40 A4-80 1
Valve plate mount 1
24 mm, 1/2” socket 1
Flush valve tool 1
Torque wrench 60-340 Nm 1
Fork wrench 13 mm 2
Fork wrench 24 mm 1
Fork wrench 30 mm 1
Distance adapter 1
Screwdriver 5.5 x 1 mm 2
Screw (M8 x 16 mm) 2
Screw (M6 65 mm) 2
Shaft tool 1
Note:
The parts listed are not sold separately, only in
various kits.
To Next Page
Need help?
General
