Danfoss D9h Programming Guide

Parameter 12-24 Process Data Config Read Size
Table 624: Parameter 12-24 Process Data Config Read Size
12-24 Process Data Config Read Size
Default value: 16
Parameter type: Range, 8 - 32
Setup: All setups
Conversion index: 0
Data type: Uint32
Change during operation: True
Use this parameter to configure the PCD read size in bits. Only values of multiples of 8 are valid.
Parameter 12-27 Master Address
Table 625: Parameter 12-27 Master Address
12-27 Master Address
Default value: 0
Parameter type: Range, 0 - 4294967295
Setup: All setups
Conversion index: 0
Data type: OctetString
Change during operation: False
Parameter 12-28 Store Data Values
Table 626: Parameter 12-28 Store Data Values
12-28 Store Data Values
Default value: [0] Off
Parameter type: Option
Setup: All setups
Conversion index: –
Data type: Uint8
Change during operation: True
This parameter activates a function that stores all parameter values in the non-volatile memory (EEPROM) thus retaining parameter
values at power-down. The parameter returns to [0] Off.
Option
Name
Description
[0]*
Off
[1]
Store all setups
[2]
Store all setups
Parameter 12-29 Store Always
Table 627: Parameter 12-29 Store Always
12-29 Store Always
Default value: [0] Off
Parameter type: Option
Setup: 1 setup
Conversion index: –
Data type: Uint8
Change during operation: True
Activates a function that always stores received parameter data in the non-volatile memory (EEPROM).
Option
Name
Description
[0]*
Off
[1]
On
AU275636650261en-000101 / 130R0334360 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide

Danfoss D9h Specifications

General

Brand	Danfoss
Model	D9h
Category	DC Drives
Language	English