Danfoss DEVIreg 850 IV - Page 21

DEVIreg™ 850 IV
21Installation instruction
Press when all sensors for System B are found…
System B is installed…
SYSTEM B!
INSTALLED
System is being checked…
CHECKING SYSTEM
<>
Press to select system to configure.
CONFIG SYSTEM:
SYSTEM A
Press to configure selected system (naming
sensors, changing factory settings and setting priorities.)
CONFIG SYSTEM:
SYSTEM B
Please refer to “Changing parameters and performance of systems” in “User Manual”
for description of the configurable parameters.
Press to end configuration.
PRESS  TO END
CONFIGURATION.