4 VI.72.M4.02 Danfoss 11/97 BC-HM
Time switch mounting
An analog or digital time switch can be
fitted by first removing the plastic lid,
cover plate and time switch cover.
Remove the lid by pressing it towards
the left. The spigots will slide out of the
hinges. The time switch cover can be
removed by taking out the two screws.
Insert the time switch with pins
downwards and centre it in the case.
Then secure time switch and frame with
the screws provided.
Replacement of time switch
The time switch can be removed after
the screws have been taken out by
carefully tilting it from the top with a
small screwdriver.
To Next Page
Loading...
Need help?
General
