Danfoss FC 100 - Page 2

Control Wires 49
Power Connections 50
Line connection 59
Fuses 60
Electrical Installation, Control Terminals 63
Connection Examples 65
Start/Stop 65
Pulse Start/Stop 65
Speed Up/Slow 66
Potentiometer Reference 66
Electrical Installation - continued 67
Electrical Installation, Control Cables 67
Switches S201, S202, and S801 69
Final Set-up and Test 70
Additional Connections 72
Motor Thermal Protection 72
4. How to Program 73
Graphical (GLCP) and Numerical (NLCP) Display 73
How to Program on the Graphical LCP 73
How to Program on the Numerical Local Control Panel 74
Quick Set-up 75
Parameter Descriptions 82
Parameter Options 84
Default settings 84
0-** Operation and Display 85
1-** Load / Motor 87
2-** Brakes 88
3-** Reference / Ramps 89
4-** Limits / Warnings 90
5-** Digital In / Out 91
6-** Analog In / Out 93
8-** Communication and Options 95
9-** Profibus 97
10-**CAN Ser. Com. Bus 98
11-** LonWorks 99
13-** Smart Logic Controller 100
Contents
VLT
®
HVAC DRIVE High Power
Instruction Manual
2 MG.11.F1.22 - VLT
®
is a registered Danfoss trademark.