Danfoss FC 100 - Page 86

Par. No. # Parameter description Default value 4 set-up Change during operation Conver-
sion index
Type
0-6* Password 0-60 Main Menu Password 100 N/A 1 set-up TRUE 0 Uint16 0-61 Access to Main Menu w/o Password [0] Full access 1 set-up TRUE - Uint8
0-65 Personal Menu Password 200 N/A 1 set-up TRUE 0 Uint16
0-66 Access to Personal Menu w/o Password [0] Full access 1 set-up TRUE - Uint8 0-7* Clock Settings 0-70 Set Date and Time ExpressionLimit All set-ups TRUE 0 TimeOfDay 0-71 Date Format null 1 set-up TRUE - Uint8 0-72 Time Format null 1 set-up TRUE - Uint8
0-74 DST/Summertime [0] Off 1 set-up TRUE - Uint8
0-76 DST/Summertime Start ExpressionLimit 1 set-up TRUE 0 TimeOfDay
0-77 DST/Summertime End ExpressionLimit 1 set-up TRUE 0 TimeOfDay
0-79 Clock Fault [0] Disabled 1 set-up TRUE - Uint8
0-81 Working Days null 1 set-up TRUE - Uint8
0-82 Additional Working Days ExpressionLimit 1 set-up TRUE 0 TimeOfDay
0-83 Additional Non-Working Days ExpressionLimit 1 set-up TRUE 0 TimeOfDay
0-89 Date and Time Readout 0 N/A All set-ups TRUE 0 VisStr[25]
4. How to Program
VLT
®
HVAC DRIVE High Power
Instruction Manual
86 MG.11.F1.22 - VLT
®
is a registered Danfoss trademark.
4