Danfoss MCX-RTU - Sensor Configuration; Advanced Setup Options

User Guide | MCX-RTU Rooftop
RS8KE102 | 16
© Danfoss | ADAP-KOOL® | 2018.11
OPT Setup Options Function Default Units
C32 Compr3 AO Type Select AO Range for Cool3(0-5,1-5,0-10,2-
10,Custom)
1-5 vdc
C33 Compr4 AO Type Select AO Range for Cool4(0-5,1-5,0-10,2-
10,Custom)
1-5 vdc
C34 Damper AO Type Select AO Range for Damper(0-5,1-5,0-10,2-
10,Custom)
2-10 vdc
C35 Custom AO Min Set Min VDC for Custom AO(0.0-10.0vdc) 1.5 vdc
C36 Custom AO Max Set Max VDC for Custom AO(0.0-10.0vdc) 5.0 vdc
C37 Ovrd Night Set-
back
If Yes, then Night Setback can be
overridden(Yes/No)
No
C42 Invert Fan AO Invert Fan AO(Normal/Invert) Normal
C43 Invert Compr 1 AO Invert Compr1 AO(Normal/Invert) Normal
C44 Invert Compr 2 AO Invert Compr2 AO(Normal/Invert) Normal
C45 Invert Compr
3 AO
Invert Compr3 AO(Normal/Invert) Normal
C46 Invert Compr
4 AO
Invert Compr4 AO(Normal/Invert) Normal
C47 Invert Damper
AO
Invert Damper AO(Normal/Invert) Normal
C48 Zone RH Select Sensor for Zone
RH(Disable,Local,GlobalRH1-5,Avg)
Local
C49 Zone CO2 Select Sensor for Zone CO2(Disable,Local,
GlobalCO2-1-5)
Local
C50 Outdoor Temp Select Sensor for Outdoor
Temp(Disable,Local,Global)
Local
C51 Outdoor RH Select Sensor for Outdoor
RH(Disable,Local,Global)
Local
C52 Outdoor CO2 Select Sensor for Outdoor
CO2(Disable,Local,Global)
Disable
C40 Supply Air
Sensor
Select Sensor for Supply Air(Disable,Local) Local
C39 Return Air
Sensor
Select Sensor for Return Air(Disable, Local) Local
C38 Mixed Air Sensor Select Sensor for Mixed Air(Disable, Local) Local
C41 Zone Cntl Sensor Zone Control uses the Zone or Return Air
sensor
Zone
C53 HT/CL Ctrl Mode Select HT/CL Ctrl Mode(Standard/Supply
Air)
Standard
C54 Fan VLT Modbus Enable Fan VLT Modbus Control(Disable/
Enable)
Disable
C55 HTReset AO Type Select AO Range for HTReset AO(0-5,1-5,0-
10,2-10,Custom)
0-10
C56 Invert HTReset
AO
Invert HTReset AO(Normal/Invert)
C57 Zone Control Zone Sensor
Config(Single;Average;High;Low)
Single
C58 BldPress Sensor Select Sensor for Building Pressure
Control(Disable;Local;Global)
Local
C59 Condenser Cntl Enable AO Condenser Control(No/Yes) No